POPLAR PLYWOOD Our poplar plywood is made with WBP glue (water-resistant). The panels are relatively light (please see Density table), yet stable and well balanced- ideal panels for marine, exterior or interior use, such as flooring underlay, roof covering, wall partitions etc. Specification according to the Bulgarian State Standard (BDS) 384 - 76 Dimensions, mm 2500 x 1250, 1250 x 2500 Thickness, mm 6, 8, 10, 12, 14, 16, 18, 21, 24, 30 Tolerance on length/ width +/- 2mm Grade of face veneer A, AB, B, BB, C, CC Number of plies from 3 up to 15 (depending on thickness) Surface quality Non-calibrated or calibrated, not sanded Formaldehyde emission class E1 Water resistance WBP mark Moisture content 8-12 % Ultimate shearing strength 1,2 MPa (after one hour in boiling water) Species Poplar Application cottage-building building & construction vehicle industry packaging etc. <a href="default.html">welde.at</a> |<a href="fimfaced_plywood_spec.html"> fimfaced_plywood</a> | <a href="fimfaced_plywood_quallity.html">fimfaced_plywood_quality</a> | <a href="fimfaced_plywood_results.html">fimfaced_plywood_results</a> | <a href="rawpoplar_plywood_spec.html">rawpoplar_plywood_spec</a> | <a href="rawpoplar_plywood_density.html">rawpoplar_plywood_density</a> |<br> <a href="rawpoplar_plywood_quality.html">rawpoplar_plywood_quality</a> |<a href="veneered_plywood_spec.html"> veneered_plywood_spec</a> | <a href="hardboard_plywood_spec.html">hardboard_plywood_spec</a> | <a href="sawn_timber_softwood.html">sawn_timber_softwood</a> | <a href="sawn_timber_hardwood.html">sawn_timber_hardwood</a> |<br> <a href="wood_products.html">wood_products</a> | <a href="about.html">about</a> | <a href="partners.html">partners</a> | <a href="representatives.html">representatives</a> | <a href="contact.html">contact</a> | <a href="inquiryform.html">inquiryform</a> | <a href="DE/default.html">welde.at-german version</a> |